Terex TL160 — 7.8.17 Electrical equipment

Care and Maintenance 7 7.8.17.2 Removing the battery Turn off the battery main switch (78/1). First disconnect the ground cable (79/1) on battery 1 (79/6), then the positive cable (79/2) on battery 2 (79/6). Remove the jump cable (79/3). Release the clamping brackets (79/4; 2 on each battery side). Lift out the batteries. 7.8.17.3 Installing the battery Place both batteries into the machine. Attach the batteries using 2 clamping brackets for each battery (79/4). Fig. 78 Battery main switch Re-attach the jumper cable (79/3): Connect the positive terminal (+) of battery 1 (79/5) with the negative terminal (-) of battery 2 (79/6).

Connect the positive cable (79/2) to the positive terminal (+) of battery 2 (79/6). 2 5 Connect the ground cable (79/1) to the negative terminal (-) of battery 1 (79/5). 6 Machine damage due to incorrect connection of terminals. Ensure that the negative terminal is connected to the negative pole (–) and the positive terminal to the positive pole (+). 3 1 Attention 4 In winter, in particular, the battery charge should be closely monitored. Fig. 79 Removing and installing the battery 7.8.17.4 Checking the lighting and warning equipment Check the function of the lighting equipment. Check the function of the indicator lamps. Check the function of the warning equipment.

101/112 TL160 Operating Manual 12.9.08 Version 1.0 1