Terex TL160 — 6.1 Recovery

Recovery, Loading and Transporting 6 6 Recovery, Loading and Transporting 6.1 Recovery Towing of the wheel loader must be restricted to clearing a junction or a road, to prevent damage to the hydrostatic travel drive. If possible, let the diesel engine run at low idle during towing. Machine damage due to excessively fast towing. Tow the machine at walking speed. Towing lugs Front: right and left on the axle plates. Rear: bottom right and left on the side plates of the rear end. Fig. 29 Hydraulic pump Attention Max. load suspension of towing lugs approx. 9200 kg.

Whenever the wheel loader has to be towed, for whatever reason, the “Travel” oil circuit must be opened so that the hydrostatic transmission no longer acts as an auxiliary brake. At the two high-pressure relief valves (29/1) with bypass, loosen the screw (30/1) by no more than 3 turns. After towing, screw back in screw (30/1) until the stop. Machine damage due to hydraulic system contamination. Absolute cleanliness is essential when working on the hydraulic system. Danger to life due to machine rolling away. Always secure the machine with chocks and relieve the hydraulic system of pressure before carrying out maintenance and repair work. Fig.

30 High-pressure relief valve 59/112 TL160 Operating Manual 12.9.08 Version 1.0 1 La85328