Terex TL160 — 7.1 Intervals

Care and Maintenance 7 7 Care and Maintenance The good operating condition and life expectancy of machines are largely influenced by care and maintenance. For this reason, it is in every machine owner’s interest to perform the specified maintenance work and comply with the service intervals. This Chapter deals in detail with periodic maintenance, inspection and lubricating tasks. The type-specific maintenance and inspection plan lists all work to be performed on the machine at regular intervals. Maintenance and inspection plans for this purpose are contained in every Instruction Book.

It is essential that the recommendations in the Chapter "Safety and Prevention of Accidents" are observed ( О 2, 13). 7.1 Intervals Tab. 22 Intervals 1 whichever comes first 2 also applicable if new or overhauled diesel engines are put into operation.

63/112 TL160 Operating Manual 12.9.08 Version 1.0 Initial inspection once before first putting into operation Î 7.7.1, 68 Daily tasks Every 10 operating hours or every work shift 1 Î 7.7.2, 70 Weekly tasks Weekly or after 50 operating hours 1 Î 7.7.2, 70 100 operating hours once after first putting into operation 2 Î 7.7.4, 74 Every 500 operating hours After every 500 operating hours or 6 months Î 7.7.4, 74 Every 1000 operating hours After every 1000 operating hours or 12 months Î 7.7.4, 74 Every 2000 operating hours After every 2000 operating hours or after 2 years Î 7.7.4, 74