Care and Maintenance 7 7.2 Regular oil analyses Oil analyses are not intended as a substitute for the oil change intervals but – apart from a possible reduction of maintenance costs and as a form of preventive maintenance – they take into account the increasing environmental awareness. Advantages of an oil analysis Extension of the oil change intervals under standard or light-duty operating conditions. Minimum wear of high-quality components with optimum use of the lubricants. Periodic laboratory analyses enable an early detection of imminent damage. Repairs performed before they actually become absolutely necessary help prevent serious and unexpected damage.
Sequential damage can be avoided. How often should the oil be analyzed? Periodic oil analyses reveal trends in the condition of the oil and the machine. The oils should be analyzed at the following intervals: Hydraulic oil: 1000 operating hours Transmission oil: 500 operating hours Engine oil: 100 operating hours Based on the first results, the laboratory recommends the interval for the next sampling. Ask your Terex dealer for an information booklet detailing the scope and procedures of the oil analysis. 7.3 Warranty During the warranty period thorough inspections are stipulated which are obligatory and must be carried out by trained specialist dealer personnel.
Attention The inspections are obligatory and must be paid for. The performance of inspections as specified must be confirmed on the inspection cards in the warranty/handing-over certificate. If omitted, this may affect the warranty covered by us. 64/112 TL160 Operating Manual 12.9.08 Version 1.0