QSB4.5 and QSB6.7 Troubleshooting Symptoms Charts Section TS - Troubleshooting Symptoms Page TS-17 Coolant Temperature Below Normal Cause Correction STEP 1 Coolant temperature gauge or sensor is ............. Test the gauge and the sensor. Repair or replace, if necessary. Refer to OEM service manual. malfunctioning OK Go To Next Step STEP 2 Electronic fault codes are active ............. For instructions on how to read active fault codes, refer to Section 1. If fault codes are active, contact a Cummins Authorized Repair Facility. OK Go To Next Step Check the winterfront, shutters, and under-the- hood air. Use under-the-hood intake air in cold weather.
Refer to Cold Weather Operation, Bulletin 3387266, and Section 1. STEP 3 Engine is operating at low ambient temperature ............. OK Go To Next Step STEP 4 Fan drive or fan controls are malfunctioning ............. Check the fan drive and controls. Refer to the OEM service manual. OK Go To Next Step STEP 5 Coolant temperature gauge is malfunctioning ............. Test the temperature gauge. Repair or replace the gauge, if necessary. OK Go To Next Step STEP 6 Thermostat is not correct or is malfunctioning ............. Check the thermostat for the correct part number and for correct operation. Contact a Cummins Authorized Repair Facility.
OK Go To Next Step STEP 7 Contact a Cummins® Authorized Repair Facility