Cummins — 4021531

Troubleshooting Symptoms Charts QSB4.5 and QSB6.7 Page TS-18 Section TS - Troubleshooting Symptoms Engine Acceleration or Response Poor Cause Correction STEP 1 Operator technique is not correct ............. Refer to Section 1, Operating Instructions. OK Go To Next Step STEP 2 Fuel level is low in the tank ............. Fill the supply tank. Refer to the OEM service manual. OK Go To Next Step Check the vehicle brakes for dragging, transmission malfunction, cooling fan operation cycle time, and engine-driven units. Refer to the OEM service manual. STEP 3 Vehicle parasitics are excessive ............. OK Go To Next Step STEP 4 Clutch is malfunctioning or is not correct .............

Compare the drivetrain specifications to Cummins recommendations. Check the clutch for correct operation. Refer to the OEM service manual. OK Go To Next Step Check for correct gearing and drivetrain components. Refer to the OEM vehicle specifications. STEP 5 Drivetrain is not correctly matched to the engine ............. OK Go To Next Step STEP 6 Electronic fault codes are active ............. For instructions on how to read active fault codes, refer to Section 1. If fault codes are active, contact a Cummins Authorized Repair Facility. OK Go To Next Step STEP 7 Fuel leak ............. Check the fuel lines, fuel connections, and fuel filters for leaks.

Check the fuel lines to the supply tanks. Refer to the OEM service manual. OK Go To Next Step STEP 8 Intake manifold air temperature is above ............. Refer to the Intake Manifold Air Temperature Above Specification symptom tree. specification OK Go To Next Step STEP 9 Charge air cooler is restricted or leaking ............. Inspect the charge air cooler for air restrictions or leaks. Refer to Section 4. OK Go To Next Step