Cummins — 4021531

QSB4.5 and QSB6.7 Troubleshooting Symptoms Charts Section TS - Troubleshooting Symptoms Page TS-19 Engine Acceleration or Response Poor Cause Correction STEP 10 Air in the fuel system ............. Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe, and fuel filters as necessary. OK Go To Next Step STEP 11 Air intake or exhaust leaks ............. Check for loose or damaged piping connections and missing pipe plugs. Check the turbocharger and exhaust manifold mounting. Refer to Section 4. OK Go To Next Step STEP 12 Air intake system restriction is above specification ............. Check the air intake system for restriction.

Clean or replace the air filter and inlet piping as necessary. Refer to Section 4. OK Go To Next Step STEP 13 Fuel grade is not correct for the application or the ............. Operate the engine from a tank of high-quality fuel. Refer to Fuel Recommendations and Specifications in Section V. fuel quality is poor OK Go To Next Step STEP 14 Fuel filter or fuel suction line is restricted ............. Replace the fuel filter. Refer to Section 5. Check the fuel suction line for restriction Section 5. OK Go To Next Step STEP 15 Fuel supply is not adequate ............. Check the flow through the filter to locate the source of the restriction. Refer to Section 5.

OK Go To Next Step STEP 16 Contact a Cummins® Authorized Repair Facility