Cummins — 4021531

QSB4.5 and QSB6.7 Troubleshooting Symptoms Charts Section TS - Troubleshooting Symptoms Page TS-53 Lubricating Oil Consumption Excessive Cause Correction STEP 1 Crankcase ventilation system is plugged ............. Check and clean the crankcase breather and vent tube. Refer to Section 3. OK Go To Next Step STEP 2 Lubricating oil does not meet specifications for ............. Change the oil and filters. Refer to Section 5. Use the oil recommended in Section V. operating conditions OK Go To Next Step STEP 3 Lubricating oil drain interval is excessive ............. Verify the correct lubricating oil drain interval. Refer to Section 2.

OK Go To Next Step Inspect the engine for external oil leaks. Tighten the capscrews, pipe plugs, and fittings. Replace gaskets, if necessary. Refer to Section V for specifications. STEP 4 Lubricating oil leak (external) ............. OK Go To Next Step STEP 5 Verify the oil consumption rate ............. Check the amount of oil added versus the hours of operation. OK Go To Next Step STEP 6 Air compressor is pumping lubricating oil into the ............. Check the air lines for carbon buildup and lubricating oil. Refer to a Cummins Authorized Repair Facility. air system OK Go To Next Step STEP 7 Contact a Cummins® Authorized Repair Facility