Cummins — 4021531

Troubleshooting Symptoms Charts QSB4.5 and QSB6.7 Page TS-54 Section TS - Troubleshooting Symptoms Lubricating Oil Contaminated Cause Correction STEP 1 Lubricating oil sludge is excessive ............. Change the oil and filters. Refer to the Lubricating Oil Sludge in the Crankcase Excessive symptom tree. OK Go To Next Step STEP 2 Lubricating oil is contaminated with coolant or fuel ............. Change the oil and filters. Refer to Section 5. Use the oil recommended in Section V. OK Go To Next Step Check the fuel lift pump for correct operation. Check the pump output pressure. Replace the fuel lift pump if necessary. Refer to an Authorized Cummins Repair Facility.

STEP 3 Fuel lift pump is malfunctioning ............. OK Go To Next Step Check the bulk oil supply. Drain the oil and replace with noncontaminated oil. Replace the oil filter(s). Refer to Section 5. STEP 4 Bulk oil supply is contaminated ............. OK Go To Next Step STEP 5 Contact a Cummins® Authorized Repair Facility