Cummins — 4021531

Fuel Filter (Spin-On Type) QSB4.5 and QSB6.7 Page 5-10 Section 5 - Maintenance Procedures at 500 Hours or 6 Months Fuel Filter (Spin-On Type) Remove Remove the spin-on fuel filter with fuel filter wrench, Part Number 3398231. Install NOTE: Do not pre-fill an on-engine fuel filter. Do not pre-fill an on-engine fuel filter with fuel. The system must be primed after the fuel filter is installed. Pre-filling the fuel filter can result in debris entering the fuel system and damaging fuel system components. CAUTION Lubricate the o-ring seal with clean lubricating oil. Mechanical overtightening will distort the threads, filter element seal, or filter can. CAUTION Use the correct fuel filter.

See Cummins®/Fleetguard®/ Nelson® filter specifications for the correct part number. Install the filter on the filter head. Tighten the filter until the gasket contacts the filter head surface. Tighten the fuel filter an additional 3/4 turn after contact, or consult the filter manufacturers instructions. Prime fuel system after fuel filter installation.