Komatsu — 17. GUIDES TO MAINTENANCE

17. GUIDES TO MAINTENANCE Do not carry out any inspection and maintenance operation that is not given in this manual. Perform maintenance work on hard, flat ground. Set to the inspection and maintenance posture. Always carry out operations with the machine in the following posture unless otherwise specified. Lower the work equipment to the ground, set in the posture shown in the diagram on the right, then put blocks 1 in front and behind the tires. Place all control levers at the neutral or HOLD position. Set safety lever 2 to the LOCK position. Press parking brake switch 3 to apply the parking brake. Lock the front and rear frames with safety bar 4 . 3-2