24. SERVICE PROCEDURE When deciding the ratio of antifreeze to water, check the lowest temperature in the past, and decide from the mixing table given below. It is actually better to estimate and temperature about 10°C (18°F) lower when deciding the mixing ratio. The mixing ratio depends on the ambient temperature, but it should always be a minimum of 30% by volume (antifreeze/total amount of coolant x 100). The freezing temperature of undiluted antifreeze is –15°C (5°F). Do not store undiluted antifreeze at a temperature of below –15°C (5°F). Mixing rate of water and antifreeze WARNING Antifreeze is flammable, so keep it away from flame. Antifreeze is toxic.
When removing the drain plug, be careful not to get water containing antifreeze on you. If it gets in your eyes, flush your eyes with large amount of fresh water and see a doctor at once. Use antifreeze and appropriate water for diluting (for details, see “18.1.3 COOLANT AND WATER FOR DILUTION”) We recommend use of an antifreeze density gauge to control the mixing proportions. Prepare a container whose capacity is larger than the specified coolant volume to catch drained coolant. Prepare a hose to supply antifreeze coolant and water.
3-25 Min atmospheric temperature °C –5 –15 –20 –25 –30 °F 14 5 –4 –13 –22 Amount of antifreeze Liters 91 109 124 139 150.5 US gal 24.0 28.8 32.8 36.7 39.75 Amount of water Liters 210 192 177 162 150.5 US gal 55.5 50.7 46.7 42.8 39.75 Volume ratio % 30 36 41 46 50