24. SERVICE PROCEDURE 24.6.3 CHECK FOR LOOSE WHEEL HUB NUTS, TIGHTEN If wheel hub nuts 1 are loose, tire wear will be increased and accidents may be caused. 1. Check for loose nuts, and tighten if necessary. When checking for loose nuts, always turn the nuts in the direction of tightening to check. Tightening torque: 471 ± 49 N·m (84 ± 9 kgf·m, 347 ± 36 lbft) 2. If any wheel bolt is broken, replace all bolts for that wheel. 24.6.4 CLEAN ELEMENT IN AIR CONDITIONER RECIRCULATION FILTER (IF EQUIPPED) 1. Open the filter inspection cover, remove the filter cover, then remove the filter in the direction of the arrow. When removing the filter to the side, put your weight on the seat, and push down.
2. Clean with compressed air in the same way as for the fresh air filter. If the filter is extremely dirty, rinse it in water. After rinsing the filter, dry it completely before installing it again. 3-59