ATV Operation Basic Operating Maneuvers 2. Get seated in a comfortable position and keep hands firmly on the hand- holds. Active riding and basic maneuvers are the foundation of your ride. Without basic skills, it’s impossible to move to this level — active riding. These are your basic maneuvers: 3. Always keep your feet planted on the footrests. Starting the Engine Always start with the ATV on a flat, level surface. Carbon monoxide poisoning can kill you, so keep your ATV outside while it’s running. Follow these steps to start it up: Mounting the TRV (Operator) Mounting the TRV (Passenger) Starting the Engine Starting a Cold Engine Shifting Braking/Stopping Parking Dismounting the TRV 1.
Mount the ATV and sit down. 2. Engage the brake lever lock. 3. Turn on the ignition. Mounting the TRV (Operator) 4. Shift into neutral. 1. From the left side, grab the left-side handlebar, apply the brake, and put your left foot on the footrest. 5. Move the engine stop switch to RUN. 6. Press the starter button. 2. Grab the right-side handlebar. CAUTION 3. Swing your leg over the seat and set your right foot down on the right- side footrest. Do not run the starter motor for more than eight seconds per starting attempt. The starter motor may over- heat causing severe starter motor damage. Allow 15 seconds between starting attempts to allow the starter motor to cool. 4.
Get seated in a comfortable position. 5. Always keep your feet planted on the footrests. Mounting the TRV (Passenger) 7. Let the engine warm up. Another way to remember the starting procedure is by using the acronym “BONE-C.” It stands for: 1. After the operator is seated and has the brake firmly applied, with your left hand, grasp the left shoulder of the operator, and with your right hand grasp the backrest; then swing your leg over the seat and set your right foot down on the right-side footrest. 38 B O N E C BRAKES LOCKED ON KEY SWITCH NEUTRAL TRANSMISSION ENGINE STOP SWITCH ON CHOKE AUTO- MATIC