! WARNING Make sure the seat is secure before mounting the ATV. Severe personal injury may result if the seat is not properly secured. Front Seat Lock NOTE: On the TRV/XT models, the rear seat must be removed prior to removing the front seat. On the Lim- ited models, it is necessary only to elevate the front of the rear seat. CR011A To close the storage box, close the lid completely; then rotate the knob counter- clockwise and lock with the key. CAUTION Do not operate or trailer the ATV with lock unlocked or damage to the box will occur. CR010A 1. To remove the front seat, pull the seat lock lever up (located at the rear of the seat). Raise the rear end of the seat and slide it rearward.
1411-877 2. To lock the seat into position, slide the front of the seat into the seat retainers and push down firmly on rear of seat. The seat should auto- matically lock into position. Safety Flag Bracket A bracket is provided for mounting a flag at the rear of the ATV. Rack Loading ! WARNING The racks are designed to carry specified load capacity. Always refer to the Load Capacity Ratings chart for proper capacity. Make sure the seat is secure before mounting the ATV. Severe personal injury may result if the seat is not properly secured. ! WARNING Storage Box (Limited) Make sure the load on the rack will not interfere with the controls or obstruct the view of the operator.
Also, make sure the load is evenly distributed, properly secured, and will not shift while operating the ATV. To open the storage box, unlock the stor- age box latch and turn the knob clockwise; then open the lid by lifting up on the rear. 57