Deutz — Deutz 2011 Workshop Manual Level 3

Cylinder head W 01-04-04 2011 z Unscrew screws (arrows), remove cylinder head (1) and gasket. z Clean sealing surfaces on cylinder head and crankcase. 6 Determine cylinder head gasket Note - The piston overlap must be measured on all pistons to determine the cylinder head gasket. - The cylinder head gasket must be selected according to the greatest measured piston overlap. Determine piston UT z Turn crankshaft until the piston closes flush with the crankcase. Note Turn crankshaft in direction of rotation of engine. 0312 1558 - 0138 2/8 © 11/2004 1 © 39155 0 © 39155 0 © 39208 0 © 39208 0 © 39156 0 © 39156 0