Deutz — Deutz 2011 Workshop Manual Level 3

Cylinder head W 01-04-04 2011 z Mount shim (1) and measuring bridge (2) on crankcase. z Insert meter in measuring bridge and position the stylus with pre-tension on the piston base (arrow). z Turn the crankshaft on evenly until the reversal point of the pointer on the meter is reached. The piston is now in UT. Determine piston overlap 6 z Move measuring bridge and shim. z Place the stylus of the meter under pre-tension on the sealing surface of the crankcase (arrow). z Adjust meter to "0". z Read measuring points. Note Schematic representation for measuring the piston overlap at the points "1" and "2".

0312 1558 - 0138 3/8 © 11/2004 2 1 1 © 39157 0 © 39157 0 © 39158 0 © 39158 0 1 2 © 34151 1 © 34151 1