Deutz — Deutz 2011 Workshop Manual Level 3

Cylinder head W 01-04-04 2011 z Move the measuring bridge on the shims so that the stylus is applied to the specified measuring points. Note - Measuring points, see schematic diagram. - The stylus may not be positioned on the labeling of the piston. z Note the greatest measured value. 6 z Select the cylinder head gasket according to the greatest measured piston overlap. 02 75 02 76 02 77 z Example: Piston overlap = 0.73 mm , corresponds to cylinder head gasket with 2 notches (arrow). Install cylinder head z Make sure the clamping pins (arrows) are in place. 0312 1558 - 0138 4/8 © 11/2004 © 39159 0 © 3 9159 0 © 39160 0 © 3 9160 0 © 39161 0 © 3 9161 0