2011 Drive system W 02-03-01 W 02-03-01 Check con rod Tools - Commercial tools Micrometer gauge Internal measuring device Con rod test device 8021 - Socket size 15 References - W 02-03-03 - Special tools 100 400 - Meter Note The con rod is removed and the piston disassembled. Check piston bolt bush 6 Prepare internal measuring device z Mount probe bolt for the appropriate measuring range in the internal measuring device. z Mount meter with approx. 1 mm pre-tension in the internal measuring device. z Set micrometer gauge to - 26 mm in FL/M engines - 30 mm in BFL/M engines.
z Balance the internal measuring device between the test surfaces of the micrometer gauge and set the meter to the reversal point of the pointer to ”0”. Note Schematic representation for measuring the piston bolt bush at the points ”a” and ”b” in the levels ”1” and ”2”. © 11/2004 0312 1567 - 0138 1/8 © 34768 1 © 34768 1 a b 1 a b 2 © 37239 0 © 37239 0