Deutz — Deutz 2011 Workshop Manual Level 3

2011 Drive system W 02-03-03 W 02-03-03 Remove and install piston bolt bush Tools - Commercial tools Note - The con rod is removed and the piston disassembled. - The piston bolt bush must be mechanically machined after assembly. - Special tools 131 340 - Assembly tool for FL/M engines 131 350 - Assembly tool for BF/M engines References - W 02-09-03 z Remove piston and con rod О Job card W 02-09-03 . 6 Remove piston bolt bush z Insert extraction socket (1) in piston bolt bush. z Place counterbearing (2) with the open side on the con rod and insert the screw (3). z Fit washer and tighten nut (4). Note - 131 340 for FL/M engines. - 131 350 for BFL/M engines. z Pull out piston bolt bush.

z Dismantle disassembly tool and remove piston bolt bush. © 11/2004 0312 1568 - 0138 1/4 4 3 1 2 © 39330 0 © 39330 0 © 39331 0 © 39331 0