Drive system W 02-03-03 2011 Install piston bolt bush z Mount piston bolt bush on con rod. Note Pay attention to matching of the oil bores (1) in the piston bolt bush and the con rod. 6 z Insert extraction socket (1) in new piston bolt bush. z Place counterbearing (2) with the closed side on the con rod and insert the screw (arrow). z Fit washer and tighten nut. z Pull in piston bolt bush flush. z Remove disassembly tool. z Check matching of oil bores in the piston bolt bush and con rod again. 0312 1568 - 0138 2/4 © 11/2004 1 © 39332 0 © 39332 0 1 2 © 39333 0 © 39333 0 © 39334 0 © 39334 0