Drive system W 02-04-01 2011 z Insert con rod bearing shell in the appropriate con rod bearing cover. Note - Note the assignment of the bearing shell. - The twist protection (1) must engage in the groove (2). z Check all clamping bushes are in place (arrows). 6 z Oil all bearing surfaces on the bearing pin and bearing shells lightly. z Insert the crankshaft carefully in the crankcase. Note Do not jam the con rods when inserting the crankshaft. 0312 1569 - 0138 5/10 © 11/2004 2 1 © 39343 0 © 39343 0 © 39344 0 © 39344 0 © 39339 0 © 39339 0