Drive system W 02-04-01 2011 z Stick both startup ring halves with guide lugs (arrow) to the fir bearing cover with a little grease. Note - The installation position of the fit bearing cover is given by the numeric identification (1): Number ”1” in 2-cylinder Number ”2” in 3-cylinder Number ”3” in 4-cylinder - The oil groove (2) must face the face mirror of the crankshaft. 1 2 © 39345 0 © 6 Install fit bearing and main bearing covers z Insert fit bearing cover (1) and main bearing cover (2) according to the numbering. Note Note assignment and installation position. - Insert bearing cover with number "1" on flywheel side. - The bevel (arrow) must face the front cover.
2 2 1 2 3 4 5 1 © 39346 0 z Oil lightly and tighten all screws (1) of the fit bearing and main bearing covers. Note Screws can be used a max. 3 times in case of provability, otherwise always change them. 02010 1 © 39347 0 0312 1569 - 0138 6/10 © 11/2004