Deutz — Deutz 2011 Workshop Manual Level 3

Drive system W 02-04-01 2011 Install all con rod bearing covers z Pull the con rods carefully onto the lifting bearing journal. Note - Note the assignment of the con rod bearing cover. - The numeric identification on the con rod bearing cover and the con rod must be identical and be opposite each other in assembly (1). - The numeric identification is facing the operating side. 6 z Tighten nuts. Note - Con rod bolts and nuts can be used a max. 5 times in case of provability, otherwise always change them. - Use a twelve-edge box wrench. 02020 0312 1569 - 0138 7/10 © 11/2004 © 39348 0 © 39348 0 1 © 39349 0 © 39349 0 © 39350 0 © 39350 0