Drive system W 02-09-07 2011 Note Schematic representation for measuring the piston bolt bore at the points ”a” and ”b” in the levels ”1” and ”2”. 6 z Measure piston bolt bore with internal measuring device. Insert the internal measuring device in the piston bolt bush. z Balance the internal measuring device respectively at the given measuring points and read off the measured value at the reversal point of the pointer. Note Measuring points, see schematic diagram. 02 78 Check the piston diameter Note Schematic representation for measuring the piston diameter at the measuring points ”1, 2 and 3”, transverse to the piston bolt bore.
0312 1571 - 0138 2/4 © 11/2004 a b 1 a b 2 © 37239 0 © 37239 0 © 36484 1 © 36484 1 3 2 1 © 37244 0 © 37244 0