Crankcase W 03-08-03 2011 z Drive in clamping pin (1) flush with the adjustment lever. Note The bore in the speed adjustment shaft must match up with the bore in the adjustment lever. 6 z Knock in the locking bolt (arrow) to the stop. Note The groove in the speed adjustment shaft must match up with the bore in the front cover. z Insert centrifugal force measuring mechanism (1). Note Do not damage the sealing lip of the shaft sealing ring. 0312 1578 - 0138 12/18 © 11/2004 1 © 33959 1 © 33959 1 © 33960 1 © 33960 1 1 © 33962 1 © 33962 1