Deutz — Deutz 2011 Workshop Manual Level 3

Crankcase W 03-08-03 2011 Measure and set the parallelism of the roller lever. z Place shim discs of at least 0.3 mm on the stud bolts (1). z Insert regulator lever shaft with roller lever (1) and tighten nuts (2). 6 05021 Note Note the installation position of the regulator lever shaft, the side with the long cut-out ”X” must face the opening for the lube oil pump and the shim disc. z Place shims underneath the contact surface of the roller lever (1) so that the ball bearings do not touch the muff (arrows). 0312 1578 - 0138 13/18 © 11/2004 1 1 © 33963 1 © 33963 1 2 1 2 X © 39277 0 © 39277 0 1 © 39278 0 © 39278 0