Crankcase W 03-11-01 2011 z Push in spindle, push on holder (1) and insert in inside camshaft bearing. Note Make sure that the holder is evenly in contact with the crankcase. z Fit washer and nut. 6 z Press out outer camshaft bearing. z Dismantle assembly tool and remove camshaft bearing. Remove inner camshaft bearing z Insert extraction bush (1) in inner camshaft bearings. z Insert spindle and fit washer and nut. Note Align counterbearing in the center of the bearing bore (arrow). 0312 1581 - 0138 4/10 © 11/2004 1 © 39307 0 © 39307 0 © 39308 0 © 39308 0 1 © 39309 0 © 39309 0