Deutz — Deutz 2011 Workshop Manual Level 3

Crankcase W 03-11-01 2011 z Measure camshaft bearing with internal measuring device. Insert internal measuring device in the camshaft bearing. z Balance the internal measuring device respectively at the given measuring points and read off the measured value at the reversal point of the pointer. Note - Measuring points, see schematic diagram. - If the wear limit is reached, the bearing has to be changed. 03 13 03 14 Remove camshaft bearing 6 z Remove all tappets (arrow). Note Put down the components in the order of installation, note order of cylinders. Remove outer camshaft bearing z Insert extraction bush (1) in outer camshaft bearing.

0312 1581 - 0138 3/10 © 11/2004 © 39304 0 © 39304 0 © 39305 0 © 39305 0 1 © 39306 0 © 39306 0