Deutz — Deutz 2011 Workshop Manual Level 3

Crankcase W 03-11-01 2011 Install inner camshaft bearing z Mount inner camshaft bearing. Note - Note position of joint (1), see schematic diagram. - Check that the oil bores (arrows) in the camshaft bearing and the crankcase match up. 6 z Insert extraction bush (1) in the inner camshaft bearing. z Insert spindle and fit washer and nut. Note - Do not change the installation position of the camshaft bearing. - Counterbearing centered to bearing bore. z Pull in camshaft bearing until the extraction socket is almost flush with the crankcase (arrow). z Loosen assembly tool. z Check that the lube oil bores match up.

Note If the lube oil bores do not match up, the camshaft bearing must be mounted again. 0312 1581 - 0138 6/10 © 11/2004 1 © 39312 0 © 39312 0 1 © 39313 0 © 39313 0 © 39314 0 © 39314 0