Crankcase W 03-11-01 2011 z Pull in the camshaft bearing. z Loosen assembly tool. z Check that the lube oil bores match up. Note If the lube oil bores do not match up, the camshaft bearing must be mounted again. 6 z Measure the installation depth of the camshaft bearing with the depth measuring appliance from the crankcase joint to the camshaft bearing. Note - Correct the installation depth of the camshaft bearing if necessary. - Installation depth, see schematic diagram. z Remove the assembly tool. z Oil tappets lightly with engine oil and insert (arrow). Note Note assignment. 0312 1581 - 0138 8/10 © 11/2004 © 39317 0 © 39317 0 © 39318 0 © 39318 0 © 39305 0 © 39305 0