Deutz — Deutz 2011 Workshop Manual Level 3

4 Technical data 4.1 Test and adjustment data 2011 4 02 00 Drive system 0312 1642 - 0138 9/22 © 11/2004 ID No. Name Additional information Value Unit 01 70 toggle lever / toggle lever block 01 72 toggle lever bore for toggle lever axle (outlet) 18 ±0.27 mm 01 73 toggle lever bore for toggle lever axle (inlet) 18 ±0.27 mm 01 74 diameter of the toggle lever axle 17.97 ±0.01 mm 01 93 Roughness of the sealing surface 15 - 18 Rz 01 98 Length of the cylinder head screw Standard + 0.8 150.000 - 0.8 mm ID No. Name Additional information Value Unit 02 02 Main bearing pin 02 03 Diameter of the main bearing pin Standard 69.970 - 69.990 mm 02 04 Undermeasure graduation for main bearing pin 1.

Stage 0.25 mm 2. Stage 0.50 mm 02 05 Limit value for undermeasure graduation of the main bearing pin 69.47 mm 02 06 Unroundness of the main bearing pin Wear limit 0.008 mm 02 07 Surface hardness of the main bearing pin Standard +4 58 HRC 02 10 Fit bearing pin 02 11 Width of fit bearing pin 35 +0.04 mm 02 12 Undermeasure graduation for fit bearing pin 1. Stage 0.4 mm 02 13 Limit value for undermeasure graduation of the fit bearing pin (width) 35.44 mm