4 Technical data 4.1 Test and adjustment data 2011 4 0312 1642 - 0138 10/22 © 11/2004 ID No. Name Additional information Value Unit 02 20 Lifting journal 02 21 Width of lifting bearing journal 31 +0.2 mm 02 22 Diameter of the lifting bearing journal Stroke 112 mm 54.970 - 54.990 mm 02 23 Undermeasure step for lifting bearing journal 1. Stage 0.25 mm 2. Stage 0.50 02 24 Limit for undermeasure step of the lifting bearing journal 54.47 mm 02 25 Unroundness of the lifting bearing journal Wear limit 0.01 mm 02 26 Concentricity of the crankshaft max. deviation 0.05 mm 02 27 Hollow throat radius lifting and main bearing journal • Do not damage hollow throat when reworking!
• Stroke 112 mm + 0.5 1.9 mm 02 30 Crankshaft main bearing 02 31 Internal diameter of the main bearing shells Standard 70.020 - 70.055 mm 02 32 Undermeasure graduation for main bearing shells 1. Stage 0.25 mm 2. Stage 0.50 02 34 Axial clearance of crankshaft Standard 0.100 - 0.273 mm Wear limit 0.4 mm 02 35 Strength of the starting rings Standard + 0.05 2.4 mm 02 36 Strength of the starting rings 1. Overmeasure step + 0.05 2.6 mm 02 40 Con-rod 02 41 Parallelism of the con rod to the piston bolt at a distance of 100 mm 0.03 mm