4 Technical data 4.1 Test and adjustment data 2011 4 0312 1642 - 0138 11/22 © 11/2004 ID No. Name Additional information Value Unit 02 42 Parallelism of the con rod to the piston bolt at a distance of 100 mm max. perm.
deviation 0.03 mm 02 43 Internal diameter of the piston bolt bush • Standard • FL/M engines 26.025 - 26.035 mm • Standard • BFL/M engines 30.025 - 30.035 02 45 Theoretical clearance between Piston bolt bush (con rod) and piston bolt Wear limit 0.08 mm 02 48 Clearance between piston and piston bolt Wear limit 0.004 - 0.015 mm 02 50 Con rod bearing 02 52 Internal diameter of the con rod bearing shells (in installed state) 55.024 - 55.055 mm 02 53 Limit value for undermeasure graduation of the con rod bearing shells 54.524 - 54.555 mm 02 54 Undermeasure graduation of the con rod bearing 0.25 mm 02 55 Con rod bearing bore in con rod 58.500 - 58.520 mm 02 56 Theoretical clearance between the con rod bearing and the lifting journal 0.014 - 0.07 mm 02 57 Con rod bearing clearance Wear limit 0.12 mm 02 60 Piston bolt 02 61 Diameter of the piston bolt FL/M engines 25.995 - 26.000 mm BFL/M engines 29.995 - 30.000 02 62 Piston bolt clearance between con rod and piston bolt 0.025 - 0.04 mm 02 70 Piston