Other components W 12-08-03 2011 z Screw in screw (1) and position setting eccenter (arrow) at 12.00 h position. z Pre-tighten screw. 12052 6 z Mount new toothed belt. Note Note running direction of the toothed belt. The labeling (arrow) on the toothed belt must be legible from the front. z Align the toothed belt so that it is touching the crankshaft gear wheel at the guide joint (1) and the hydraulic pump gear about 4 mm behind the front edge (arrow). 0312 1631 - 0138 4/8 © 11/2004 1 © 39592 0 © 39592 0 © 39593 0 © 39593 0 1 © 39594 0 © 39594 0