Other components W 12-08-03 2011 z Remove locking pin (1). z Turn the setting eccenter in the direction of the arrow (counterclockwise) until the pointer of the clamping roller is in line with the notch (1). 6 Note Turn the setting eccenter at the hexagon socket. z Tighten screw (2). 12052 z Turn the crankshaft 2 turns in the engine’s direction of rotation (arrow). z Check the toothed belt tension. Note - The pointer of the clamping roller must be in line with the notch (1). - If the marks are not in line, the toothed belt tension must be corrected. 0312 1631 - 0138 5/8 © 11/2004 1 © 34235 1 © 34235 1 2 1 © 39595 0 © 39595 0 1 © 39596 0 © 39596 0