Other components W 12-08-03 2011 Correct the toothed belt tension z Loosen screw (2) and pre-tighten again. 12052 z Turn the setting eccenter in the direction of the arrow (counterclockwise) until the pointer of the clamping roller is in line with the notch (1). z Tighten screw (2). 12052 6 z Mount adapter (1). Note The flattened side (arrow) must face the toothed belt. z Mount protective cover (2) and tighten screws (1). Note Pay attention to the correct fitting of the protective cover. 12056 0312 1631 - 0138 6/8 © 11/2004 2 1 © 39595 0 © 39595 0 1 © 39597 0 © 39597 0 1 2 1 © 39275 0 © 39275 0