Deutz — Deutz 2011 Workshop Manual Level 3

5 Job card overview 5.2 Sorted numerically 2011 5 0312 1645 - 0138 5/6 © 11/2004 Job card Activity Maintenance group W 07-07-01 Remove and install injection valves Fuel system W 07-07-02 Check and repair injection valve Fuel system W 07-07-05 Checking and setting injection valves (leak fuel-less) Fuel system W 07-08-01 Remove and install solenoid valve (LDA) Fuel system W 07-08-02 Remove and install charge pressure-depedent full load stop (LDA) Fuel system W 07-10-06 Remove and install fuel lines (with Bosch injection pumps) Fuel system W 07-10-06 Remove and install fuel lines (with leak fuel line) Fuel system W 07-10-08 Remove and install fuel filter console Fuel system W 07-11-01 Remove and install fuel pump Fuel system W 08-04-05 Remove and install lube oil pump Lube oil system W 08-04-06 Remove and install oil intake pipe Lube oil system W 08-04-07 Remove and install lube oil tray Lube oil system W 08-08-02 Remove and install oil cooler Lube oil system W 08-10-06 Remove and install oil filter cartridge Lube oil system W 08-11-02 Remove and install oil pressure regulating valve, check Lube oil system W 08-11-07 Remove and install oil filter console Lube oil system W 08-11-08 Remove and install oil pressure switch Lube oil system W 08-11-09 Remove and install oil pressure sensor Lube oil system W 08-11-11 Remove and install oil temperature sensor Lube oil system W 08-11-12 Remove and install oil thermostat (oil cooler) Lube oil system W 08-15-01 Remove and install oil pressure line (turbocharger) Lube oil system W 08-15-02 Remove and install oil return line (turbocharger) Lube oil system W 08-16-01 Remove and install oil line for injection adjuster supply Lube oil system W 08-16-02 Remove and install oil temperature sensor (in engines with injection adjustment) Lube oil system