Mack Trucks V-MAC IV — Mack Trucks V-MAC IV — спецификация (EN)

MID 144-PID 84 MID 144-PID 84 MID 144 PID 84 — ROAD SPEED FMI 14 Special Instructions Failure Mode Identifier (FMI): 2 (Data Erratic, Intermittent or Incorrect), 14 (Special Instructions) Conditions for fault code: Intermittent faulty data Speed signal from tachometer was updated incorrectly Parameter Identification (PID): P84 Message Identification (MID): 144 Possible causes: Circuit Description: The Vehicle Speed Sensor (VSS) is an inductive sensor. When the vehicle is moving, the transmission output shaft speedometer gear teeth rotate past the VSS tip and a pulsed signal voltage is generated.

The Vehicle Electronic Control Unit (VECU) monitors the frequency of the signal generated by the VSS, to calculate the road speed. The air gap between the sensor and the toothed gear influences the VSS signal output and should be checked if erratic or inaccurate speedometer readings are reported. Faulty information from tachometer J1939 dataline link Tachometer harness Reaction from Vehicle Electronic Control Unit (VECU): N/A Noticeable external symptoms: N/A Location: The Vehicle Speed Sensor (VSS) is located in the rear of transmission, near the output shaft. FMI 2 Data Erratic, Intermittent or Incorrect Conditions for fault code:

Intermittent faulty data Speed signal from speedometer and ABS differs too much Possible causes: ABS Harness ABS Sensor Tachometer Tachometer harness Reaction from Vehicle Electronic Control Unit (VECU): N/A Noticeable external symptoms: N/A Page 149 MID 144-PID 84