MID 144-PSID 230 MID 144-PSID 230 MID 144 PSID 230 — SOFTWARE ERROR FMI 5 Current Below Normal or Open Circuit Failure Mode Identifier (FMI): 4 (Voltage Below Normal, or Shorted To Low Source), 5 (Current Below Normal or Open Circuit), 12 (Bad Intelligent Device or Component) Conditions for fault code: Software has been shutdown because of voltage too low Parameter Identification (PSID): P230 Possible causes: Faulty harness Message Identification (MID): 144 Voltage supply interrupted Circuit Description: N/A Faulty VECU Location: N/A Reaction from Vehicle Electronic Control Unit (VECU): FMI 4 Voltage Below Normal, or Shorted To Low Source N/A Noticeable external symptoms:
Conditions for fault code: Abnormally low voltage or short circuit to ground N/A FMI 12 Uncontrolled reset of SW Bad Intelligent Device or Component Possible causes: Conditions for fault code: Faulty harness Faulty component Supply voltage drop Severe error reset the software Faulty software Possible causes: Faulty VECU Faulty software Reaction from Vehicle Electronic Control Unit (VECU): Faulty VECU Yellow lamp is illuminated Reaction from Vehicle Electronic Control Unit (VECU): Noticeable external symptoms: Yellow lamp is illuminated N/A Noticeable external symptoms: N/A Page 182 MID 144-PSID 230