Mack Trucks V-MAC IV — Mack Trucks V-MAC IV — спецификация (EN)

MID 144-SID 230 MID 144-SID 230 MID 144 SID 230 — IDLE VALIDATION SWITCH #1 FMI 7 Mechanical System Not Responding or Out Of Adjustment Failure Mode Identifier (FMI): 7 (Mechanical System Not Responding or Out Of Adjustment) Conditions for fault code: Parameter Identification (SID): S230 Faulty readout from IVS #1 Message Identification (MID): 144 Possible causes: Idle Validation Switch (IVS) Circuit Description: The Idle Validation Switch (IVS) updates the Vehicle Electronic Control Unit (VECU) with the idle status. At idle, the Idle Validation Switch (IVS) is open and no voltage is applied to the Idle Validation Switch (IVS).

At approximately 5% - 100% pedal position the Idle Validation Switch (IVS) closes. IVS connector IVS harness Reaction from Vehicle Electronic Control Unit (VECU): Location: The Idle Validation Switch is integral to the Accelerator Pedal Position (APP) Sensor. The Accelerator Pedal Position (APP) Sensor is part of the accelerator pedal assembly. Yellow lamp is illuminated Noticeable external symptoms: Engine will not supply requested fuel to engine Page 183 MID 144-SID 230