Mack Trucks V-MAC IV — Mack Trucks V-MAC IV — спецификация (EN)

FMI 3 FMI 11 Voltage Above Normal, or Shorted to High Source Root Cause Not Known (Data Incorrect) Conditions for fault code: Conditions for fault code: The Boost Air Pressure Sensor output is too high or too low. A short to battery in the metering circuit An open in the ground circuit of the Boost Air Pressure Sensor Possible causes: Possible causes: Faulty Boost Air Pressure Sensor harness Intermittent fault in the Boost Air Pressure Sensor harness Inlet air leakage Boost Air Pressure Sensor failure Faulty Boost Air Pressure Sensor connector Reaction from EMS module: Boost Air Pressure Sensor failure MIL lamp will illuminate Reaction from EMS module: Noticeable external symptoms:

MIL lamp will illuminate Engine derate Noticeable external symptoms: MIL lamp illuminated Engine derate MIL lamp illuminated FMI 5 Current Below Normal or Open Circuit Conditions for fault code: A short to ground An open in the 5 volt supply circuit An open in the metering circuit Possible causes: Intermittent fault in the Boost Air Pressure Sensor harness Faulty Boost Air Pressure Sensor connector Boost Air Pressure Sensor failure Reaction from EMS module: MIL lamp will illuminate Noticeable external symptoms: Engine derate MIL lamp illuminated Page 32 MID 128-PID 102