n Note: Use a spanner wrench to adjust the sleeve to the desired position. GENERAL LUBRICATION Lubrication Points It is advisable to lubricate certain components periodically and before storage to ensure free movement. 1. Brake Lever Holder (oil) 2. Throttle Lever (oil) 3. Steering Shaft Holder (grease) 4. Brake Pedal Pivot (grease) 5. Shift Rod Ball Joints (oil) 1 2 3 5 4 Engine/Transmission Oil and Filter Change the engine oil and oil fi lter at the scheduled intervals. The engine should always be warm when the oil is changed so the oil will drain easily and completely. 1. Park the ATV on level ground. 2. Loosen the oil level stick.
Be careful not to allow conta- minates to enter the opening. 3. Remove the drain plug from the bottom of the engine and drain the oil into a drain pan. 4. Remove the oil fi lter plug from the fi lter mounting boss (loca ted on the front-right side of the transmission case) and allow the fi lter to drain comple- tely. 74 Position Position Sprungkraft Spring Force Einstellung Setting Last Load 1 Strsotnagrker wSeoifcth lLeiigchhtt 2 3 4 5 Strsotnagrker Shtaifrft sHchewaveyr