! CAUTION Be careful not to spill any fl uid when fi lling the brake fl uid reservoir. Wipe away spilled fl uid immediately. Brake Hoses Carefully inspect the hydraulic brake hoses for cracks or other dama- ge. If found, take the ATV to an authorized Arctic Cat ATV dealer to have the brake hoses replaced. Brake Pads The clearance between the brake pads and brake discs is adjusted automatically as the brake pads wear. The only maintenance that is required is replacement of the brake pads when they show excessive wear. Check the condition of each of the brake pads as follows: 1. Remove a front wheel. 2. Measure the thickness of each brake pad. 3.
If thickness of either brake pad is less than 1.0 mm (0.039 in.), take the ATV to an authorized Arctic Cat ATV dea- ler to have brake pads replaced. Brake Lever Lock Check to make sure the brake lever lock engages properly and that the brake (when engaged) locks the wheels. 1. Engage the brake lever lock. 2. Attempt to push the ATV. GENERAL MAINTENANCE n Note: The brake lever lock must lock the wheels. If it doesn’t, take the ATV to an authorized Arctic Cat ATV dealer for service. 77