Arctic Cat GmbH — 400 ENGLISCH

PROTECTIVE RUBBER BOOTS The protective boots should be inspected periodically according to the Maintenance Schedule. Ball Joint Boots (Upper and Lower/Right and Left) 1. Secure the ATV on a sup- port stand to elevate the front wheels. 2. Remove both front wheels. 3. Inspect the four ball joint boots for cracks, tears, or perforations. 4. Check the ball joint for free-play by grasping the steering knuckle and turning it from side to side and up and down. 5. If boot damage is present or ball joint free-play seems excessive, contact an authorized Arctic Cat ATV dealer for service. Tie Rod Boots (Inner and Outer/Right and Left) 1. Secure the ATV on a support stand to elevate the front wheels. 2.

Remove both front wheels. 3. Inspect the four tie rod boots for cracks, tears, or perforations. 4. Check the tie rod end free-play by grasping the tie rod near the end and attempting to move it up and down. 5. If boot damage is present or tie rod end free-play seems excessive, contact an authorized Arctic Cat ATV dealer for service. BATTERY The battery is located under the seat. The battery in this ATV is a “sealed” type and does not require any maintenance unless discharged. Distilled water and/or electrolyte cannot be added to the battery. 78