Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING 3 - 67 WALK-AROUND CHECK Before starting the engine, look around the machine and under the machine to check for loose nuts or bolts, or nuts leakage of oil, fuel, or coolant, and check the condition of the work equipment and hydraulic syste m. Check al so for loose wiring, play, and accumulation of dust in places which reach high temperatures. Leakage of oil or fuel, or accumulation of flammable material around high temperature parts, suc h as th e engine muf fler or turbocharger, may cause fire. Check carefully, and if any abnormality is found, repair it or contact your Komatsu distributor.

found, repair it or contact your Komatsu distributor. Do not get on or off the machine from the rear. Using this position is dangerous because it is easy to slip and y ou can not be seen from the operator's compartment. Al ways use the handrail and step at the side when getting on or o ff the machin e. If the machine is at an angle, make it ho rizontal before checking. the machine and under the machine to check for loose nut or bolts, or Before starting the engine, look around leakage of oil, fuel, or coolant, and check the condition of the work equipment and hydraulic syste m. Check al so for loose wiring, play, and collection of dust at places which reach high temperatures.

n before starting the engine each day. Always carry out the items in this sectio 1. 1. Check for damage, wear, play in wo rk equipment, cylinders, linkage, hoses Check that there are no cracks,exce cessive wear,or play in the work equipment,cylinders,linkage , or ho ses.If any abnormality is found,repair it. Check that there are no cracks, excessi ve wear, or play in the work equipment, cylinders, l inkage , or h oses. If any abnormality is found, repair it. 2. 2. Remove dirt and dust from around e ngine, battery radiator.

Check if there is any dirt or dust acc umulated around the battery or high temperature e ngine parts,such as the engine muffler or turbocharger.Rem ove all such dirt or flammable material. Check if there is any dirt or dust accum ulated around the engine or radiator. Check also if there i s an y flammable material (dead leaves, twigs, grass, etc. ) accumulated around the battery or high temperature e ngine parts, such as the engine muffler or turbocharger. R emove all such dirt or flammable material. 3. Check for leakage of water or oil aro und engine Check that there is no oil leakage from t he engine or coolant leakage from the cooling system. If any abnormality is found, repair it. 4.

Check for oil leakage from power tra in case, final drive case, hydraulic tank, hose, join t. Check that there is no oil leakage. If any abnormality is found, repair the place where t he o il is le aking Check for leakage of oil from the underc over. Check the ground for traces of oil leakage. 5. 5. Check of the undercarriage parts Check track shoe, sprocket, idler, g uard for damage, wear, loose bolts, or leakage of o il from rollers, etc Repair them if any trouble is found. und, repair the problem and tighten the bolts. If any damage, wear, or oil leakage is fo