Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION ADJUSTMENT WARNING ADJUSTING OPERATOR'S SEAT (A) Fore-and-aft adjustment Pull lever (1), set the seat to a position where it is easy to operate, then release the lever. Fore-aft adjustment: 160 mm (6.3 in) (8 stages) by (C) Adjust reclining angle of 3 - 80 Carry out adjustment before starting operations and when the operator s change shifts. Adjust the seat so that you c an depress the brake pedal fully with you r ba ck pressed against the back rest of the operat or's seat (B) Weight and height adju Turn knob (2) under the s (3) displays the green r turning the knob (2) whil ange.

The height can be adjusted Turn the knob clockwise counterclockwise to lowe Height adjustment range: s Weight adjustment range: 5 REMARK When the seat is pushed for ward, the available reclining angle b ecomes greater; when the s eat is pushed b ack, the available reclining angle be comes smaller. When moving the s eat back, return the seat bac k to its original position before moving the seat. Pull lever (4) up, set the se at back to the desired position, then (D) Adjusting direction of se Pull up lever (5) to unlock t he seat, and the seat can be turned hand to the position of 15° After changing the direction of the seat, return the lever securely lock the seat.

Change the direction of operation of the ripper.