. OPERATION OPERATION ADJUST MIRROR Loosen nut (1) of the mirror and adjust the mirror to a position ADJUST JOYSTICK (PCCS LEVER) WARNING REMARK PCCS: Palm command control system 3 - 82 where it gives the best view from the operator's se In particular, be sure t o adjust the mirror so that peo ple at the rear left or right of the mac After moving case (2) in o rder to adjust the position of the steering, directional, and gearshift lever, secure lock lever (1) into the notched hole. Making sur e it isin the LOCK position. If itis not completely locked , the steering, directi onal, and gearshift lever may unexpectedly move and cause damage, serious injury, or death.
The steering, direction al, and speed lever (wrist co ntrol type single lever: j oystick) can b e adjusted by 90 mm (3.5 in) in 9 stages to the fro nt or rear. Adjust to the most suitable p osition to match the adjustm ent of the operator's seat. 1. Pull up lock lever (1) to the FREE position at the rear of case (2) on left side of the operator's compartment. 1. Pull up lock lever ( 1) to the FREE position at th e rear of case 2. With lock lever (1) front of case (2), t hands. The joystic 3. Move case (2) to pulled up, use your other h and to gri p the hen move it forward with you k moves with case (2). the desired position until a r left and right click is heard.
Lock lever (1) Then pull up lock automatically retur lever (1) and release it. ns to the LOCK position.