. OPERATION TROUBLESHOOTING DISCONNECTING THE BOOSTER CABLES 3 - 145 STARTING THE ENGI 1. Make su re the cli ps are firmly c onnecte d to the battery terminals. 2. Start the engine of the booster machine and keep it running at 3. Turn the ignition switch of problem machine to the START position, and start the engine. If the engine doesn't start at f irst, try it again after 2 After the en gine ha s started, reverse ord er of connection 1. Remove clip of booste problem machine 2. Remove clip of b ooster cable ( B) from n egative (-) t erminal of the boos ter batte ry. 3. Remove clip of b ooster cable ( A) from th e positive ( +) terminal of boost er batter y. 4.
Remove clip (4) of booster cab le (A) fro m positive ( +) terminal of the di scharged battery.