Komatsu — IF BATTERY IS DISCHARGED

. OPERATION TROUBLESHOOTING PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING 3 - 144 Whe n connecting the cables, nev er contact the positive (+) and ne gative (-) te rminals. n starting the engine with a booster cable, always wear safety Whe glass es and rubber gloves. Be c areful not to let the normal machine and problem machine c ontact each other. This prevents sparks from generating near the battery which coul d ignite the hydrogen gas gi ven off by the battery. Make sure that there is no mist ake in the booster cable connections.

The f inal connection is to the en gine block of the problem machi ne, but spar ks will be generated when th is is done, so connect to a place as far as p ossible from the battery. Whe n disconnecting the booste r cable, take care not to bring th e clips in co ntact with each other or wit h the machine body. NOTICE size of the booster cable and clip should be suitable for the battery size. The size of the booster cable an d clip should be suitable for the battery size The battery of the normal machi ne must be the same capacity as that o f the engine to be starte Chec k the cables and clips for d amage or corrosion. ips are firmly connected.

Make sure that the cables and cl Chec k that the safety lock levers and parking brake levers of bot h machines are in the LOCK p Chec k that each lever is in the N EUTRAL position. CONNECTING THE BOOSTER C Keep t he starting switch of the normal machine and problem machine in the OFF positi Conne ct the booster cable as f ollows, in the order of the nu mbers marked in the diagra 1. Connect one clip (1) of booster cable (A) to the positive (+) terminal of the discharged battery. 2. Connect the other clip (2) of booster cable (A) to the positive (+) terminal of the booster battery. 3. Connect one clip of booster cable (B) to the negative (-) terminal of the booster battery. 4.

Connect the other clip of booster cable (B) to the engine block of the problem machine. 1. Co nnect one clip (1) of bo oster cable (A) to the positive (+) attery. minal of the discharged b 2. Co nnect the other clip (2) of booster cable (A) to the positi ve (+) minal of the booster batt ery. ter cable (B) to the negative (-) ery. 3. Co nnect one clip of boos minal of the booster batt 4. Co nnect the other clip of bo oster cable (B) to the engine block